XTC G1-M carbine replica

XTC G1-M Carbine Replica

Modify-Tech to ceniona firma z ponad 50-letnią tradycją, specjalizująca się w produkcji najwyższej jakości części zamiennych, narzędzi, akcesoriów. Z powodzeniem działa na rynku airsoftowym oferując części wewnętrzne, zestawy tuningowe i wiele innych. Prezentowana replika karabinu elektrycznego jest kolejnym, fenomenalnym produktem Modify w segmencie replik ASG. Mogliśmy być być spokojni o efekt pracy: XTC-G1 można śmiało umieścić na najwyższej półce replik elektrycznych dostępnych aktualnie na rynku. 

The elements made in CNC technology out of T6065 aluminum include: the M-LOK front grip, Picatinny rails in the 1913 standard, the piston head, the cylinder head and the cylinder itself are that are made of aviation aluminum. The following parts are made out of steel, also in CNC technology: the trigger, gears, tactical sling swivel and the flash hider. The other parts, such as the Billet Style receiver and the stock guide, are made out of high-quality aluminum alloy. The 14.5-inch outer barrel was made out of metal, with the use of CNC machines.

The double-sided, 45-degree firing mode selector allows you to operate it with with both the left and right hand. It is a very convenient solution to speed up operating of the selector.

The muzzle velocity adjustment system combined with the quick spring change system makes the replica very versatile. With just one turn of 30 degrees of the bolt on the joint between the receiver and the stock guide you can limit the muzzle velocity to about ~ 360 FPS.

The Wide-Bore Extreme Precision barrel (caliber 6.1 mm) increases the replicas range - thanks to the wide diameter, the BB’s do not bump into the barrel interior, so they fly much further than in replicas with a similar muzzle velocity. 

A functional bolt-catch will significantly facilitate the adjustment of the hop-up, which is designed for precise calibration, the tightness of the entire hop-up system has been maximized.

The ergonomic pistol grip, folding sights and the stock were made out of a reinforced nylon polymer fiber. The stock also has steel elements. The 6-position stock adjustment is very convenient, it works very smoothly and without problems. Importantly - in place of traditional cables routed inside the guide, a system of built-in contacts has been utilized, so that the cables do not interfere with the batterie placement in the guide, and when adjusting the FPS or using the quick spring replacement. 

The gearbox of this replica is yet another masterpiece. It houses a set of steel gears made on CNC machines: durable and virtually indestructible. They are fitted on 8mm ceramic ball bearings. The piston with seven steel teeth High speed / Torque Ultra ends with a head made of aviation aluminum. The piston is embedded in the cylinder, also made of aviation aluminum.

The included mid-cap magazine with a capacity of 190 BBs was made of glass-fiber reinforced plastic.

The set includes:

- replica

- magazine

- user manual