![SA-V13 ONE™ Carbine Replica (ASCU2 Gen.4 + version) SA-V13 ONE™ Carbine Replica (ASCU2 Gen.4 + version)](https://air.viruisis.lt/43236-large_default/sa-v13-one-carbine-replica-ascu2-gen4-version.jpg)
![SA-V13 ONE™ Carbine Replica (ASCU2 Gen.4 + version) SA-V13 ONE™ Carbine Replica (ASCU2 Gen.4 + version)](https://air.viruisis.lt/43236-large_default/sa-v13-one-carbine-replica-ascu2-gen4-version.jpg)
SA-V13 Carbine Replica
The SA-V13 carbine replica by Specna Arms is made out of zinc and aluminum alloy, with the use of steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels) The SF type stock that houses the battery and the pistol grip are made out of polymer plastic. The replica's body and the RIS rail set have been anodized, which guarantees a high degree of protection against corrosion. The painting of the replica itself was made by powdering, after the surface was sandblasted. This ensures a much higher than usual abrasion resistance of the applied paint. There are USMC markings located on the body.
The replica has been fitted very well - in a way that has been observed almost exclusively in G&P or Classic Army manufacturers - and perfectly balanced. This ensures perfect maneuverability of the replica, and its weight is almost imperceptible after placing the replica on the shoulder.
The replica uses a quick spring change system, the so-called Enter & Convert ™. This allows for quick and efficient adjustment of the replica's power to the conditions expected in the game field without the need to have access to a workshop or a number of specialized tools - after removing the gearbox from the replica's body, the process of replacing the spring itself takes literally a few seconds.
The advantages of the Enter & Convert™ system cannot be overestimated. In the light of the tendency prevailing throughout Europe to apply legal limits of the muzzle velocity of the replica and the arrangements existing within the environments themselves, this system provides the user with considerable opportunities and a lot of freedom. The ESA ™ system allows you to quickly, with little to no effort change the main spring, and thus adjust the muzzle velocity of the replica to the requirements of the game organizer. This guarantees an ideal compromise between the effectiveness of firing your shots and your own safety and the safety of other players.
The replica has been fully adapted to work with LiPo and LiFe batteries. Thanks to the basic muzzle velocity of ~ 430 FPS guaranteed by the factory-installed main spring, the replica is perfect for middle-range operations. The set also includes an M90 spring, which allows you to reduce the initial muzzle velocity to ~ 310 FPS, making it the replica perfectly adapted to operate at short distances or inside buildings.
The gearbox, reinforced at the height of the cylinder head, houses a steel spring guide, which is an element of the Enter & Convert ™ system, and steel gears mounted on 8-mm ball bearings. The system is secured by means of four anti-reversal latches.
The replica is equipped with a 22 mm RIS rail, a set of front Free Float rails and an adjustable stock. Metal flip-up sights are mounted on the upper RIS rail, but they can be easily replaced by any optoelectronic sights. Thanks to the retractable stock with a non-slip texture stock, it is possible to adjust the length of the replica to the body type and preferences of the operator. The standard flash hider is mounted on a 14 mm left-hand thread, which allows the attachment of a silencer in its place.
To increase the realism, the replica was also equipped with a working bolt release mechanism.
The set with the replica also includes a steel hi-cap magazine with a capacity of 300 BBs.
Specna Arms replicas are compatible with many magazines available on the market, including manufacturers such as: - BOYI, - Airsoft Systems, - SRC, - King Arms, - MAG, - STAR, - ACM.
The replica has the ASCU2 Gen.4 + system installed in our service
In the latest version of the ASCU2 gen. 4+, we get an improved software that protects the system against damage caused by the use of damaged or low-quality battery packs.
ASCU is a two-piece electronic module (control unit and sensor unit) which, when installed in Airsoft replicas, significantly improves their operation. The traditional contact system has been replaced with a sensor unit that monitors the current position of the piston rack, fire selector and trigger. The information collected by it is transferred to the control unit - there, the software in the analyzes it and controls the replica's engine using an active MOSFET brake.
The Gen.4 version is primarily:
1. New transistors that provide 16 times less resistance than previous versions, resulting in even faster trigger response, better active brake performance and reduced heat generation
2. New, very strong trigger micro switch
3. New, reinforced structure of the entire system, with a polymer housing
4. Increased short circuit protection
5. Much easier installation
6. Updated software to facilitate programming
7. Improved dedicated circuit breaker lever
8. Improved dedicated selector plate
ASCU improves the work of the v.2 gearbox and makes the replica equal to the most expensive and complicated PTW class replicas.
The ASCU system monitors the replica's operation regardless of the speed of pressing the trigger and is responsible for the full execution of the piston's working cycle, both in semi-automatic and continuous fire mode. After each shot, the piston stops in the starting position.
ASCU has a Low Drain Protection system specially designed to protect against damage to Lithium Polymer (LiPo) batteries.
The ASCU interrupts the firing in the replica in the event of any problems, thus protecting the internal components from further damage.
Note!
It is recommended to use a battery with a voltage of 11.1 or 12V. 7.4 and 8.4V batteries can only be used in configurations with the M90-M100 main spring. The manufacturer recommends the use of a high-quality engine with ASCU2 gen.4 +. The manufacturer recommends using a high-quality battery with ASCU2 gen.4 +. The price of the replica does not include the optional accessories visible in some photos. The set is listed below.
The set includes: - replica - magazine - mechanical sights - additional main spring
Charakteristikos