![SA-K02 ONE™ Carbine Replica SA-K02 ONE™ Carbine Replica](https://air.viruisis.lt/34295-large_default/sa-k02-one-carbine-replica.jpg)
![SA-K02 ONE™ Carbine Replica SA-K02 ONE™ Carbine Replica](https://air.viruisis.lt/34295-large_default/sa-k02-one-carbine-replica.jpg)
SA-K02 Assault Rifle Replica
SA-K02 assault rifle replica by Specna Arms is made largely from a uniform zinc and aluminium alloy, reinforced with steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels). Both the SF stock storing the battery and the pistol grip were made from polymer. The receiver of the replica and RIS handguard have undergone the process of anodizing, which guarantees high degree of protection against corrosion. The paint was applied via a process of powder coating, after having the surface undergo the process of sandblasting prior to the application of paint. This provides a much higher than usual resistance of the applied paint to abrasion. The receiver bears USMC markings.
The replica’s parts fit very well together - in a way that could be thus far noticed solely in replicas by such top-tier manufacturers as G&P or Classic Army, the replica is also perfectly balanced. This allows for almost ideal maneuverability of the replica and its weight is almost unnoticeable once the replica has been shouldered.
The replica features a quick spring release system, so-called Enter & Convert™. Due to that system it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have access to a workshop or a set of special tools - once the gearbox has been taken out of the replica’s body, the process of spring change lasts literally seconds.
The advantages of Enter & Convert™ system are hard to overstate. In the light of the current tendency in the whole Europe to use legal limitations regarding the muzzle velocity of replicas or internal regulations inside various groups, the system guarantees the user a varied set of possibilities and much freedom. Enter & Convert™ system allows with minimal amount of time change the main spring, thusly customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between effectiveness of fire and safety for the user himself as well as other participants.
The replica is fully compatible with LiPo and LiFe batteries. Due to base muzzle velocity of ~410 FPS provided by the main spring installed by default by the manufacturer, the replica is perfect for operating on a medium range. The set also includes an M90 spring, which allows to reduce the muzzle velocity to ~310 FPS and as a result to adapt the replica for close-ranged and indoor operations.
The gearbox which is reinforced on the height of the cylinder’s head hides a steel main spring guide which is the element of the Enter & Convert™ system and also 8mm ball bearings and steel thread-wheels which are placed on spacers. The system is secured with the use of four anti-reversals. There is a type 2 cylinder and the steel breaker. Replica is factory-fitted with and accurate, rotary type polymer Hop-Up unit that allows very precise and stable regulation of BB overclocking.
The Upgraded Version is equipped with some new, improved internal parts:
- set of reinforced steel gears
- steel spring guide
- lightweight, polymer piston
- aluminum, sealed piston head
- metal cylinder head
- air seal metal nozzle
The replica is equipped with a 22 mm top RIS rail and a RIS handguard in classic, four-side configuration. The top rail features a flip-up rear sight, while the front sight was mounted on the external barrel. Due to the extendable stock with an anti-slip stock pad it is possible to adapt the replica’s length to the body type and preferences of the user. Standard flash hider is based on 14 mm left-handed thread, which allows the attachment of a silencer in its place.
The replica was adapted for use by both right- and left-handed users thanks to the installation of a double-sided fire mode selector and magazine release button as well as, what is a rare occurrence, a double-sided slide release button. These may seem like miscellaneous elements, however, they increase the overall realism of imitation of the original as well as pure ergonomics of usage. Noteworthy is also the original trigger guard with the model marking.
The replica comes with a steel, 300 BB, Hi-Cap magazine.
Specna Arms replica are compatible with many magazines available on the market, from manufacturers like:
- BOYI,
- Airsoft Systems,
- SRC,
- King Arms,
- MAG,
- STAR,
- ACM.
Additional accessories visible in the photographs are not part of the set!
The set does not include the battery nor charger.
The set includes:
- replica
- magazine
- fixed iron sights
- additional main spring
ATTENTION:
According to report number HKGEC1600157401, the product meets the requirements of European Union RoHS - Restriction of Hazardous Substances 2011/65/EU directive annex II as well as 2002/95/EC amending directive
that concerns the limitation of dangerous substances in electronics.
Which means that Specna Arms free from harmful materials such as:
- lead
- mercury
- cadmium
- hexavalent chromium
- polybrominated biphenyl (PBB)
- polybrominated diphenyl ether (PBDE)
Charakteristikos