![SA-G13V EBB Carbine Replica - tan SA-G13V EBB Carbine Replica - tan](https://air.viruisis.lt/51416-large_default/sa-g13v-ebb-carbine-replica-tan.jpg)
![SA-G13V EBB Carbine Replica - tan SA-G13V EBB Carbine Replica - tan](https://air.viruisis.lt/51416-large_default/sa-g13v-ebb-carbine-replica-tan.jpg)
Replica SA-G13 EBB carbine
Well-known on the airsoft market brand Specna Arms presents the SA-G series! Replicas SA-G with their level of workmanship can boldly compete with replicas from top manufacturers. G-Series are carbines in several interesting configurations, including models equipped with an integrated scope, collimator, bipod or front grip in the KeyMod system.
The replica, as in the original, is made of very durable polymer, metal, and in the most critical areas steel(so all screws, pins and the tactical suspension handle are steel). The replica is supplied with a front that houses the battery.
The replica is characterised by very good fit, and is made of an eye-pleasing matt polymer. Important components are connected by pins, in this way we can change individual elements such as the magazine slot. Made of solid polymer, the replica's body has a individual serial number, manufacturer's markings and aesthetic fire selector markings. On the back of the replica, in addition to the classic transport grip, we find a fixed magnification 1.5x (adjustable) and also a collimator (also adjustable for aiming point). The replica has a side-folding and adjustable buttstock, which makes it easier to transport and also to operate in tight spaces of buildings. The replica's metal barrel is finished with a flame suppressor mounted on a 14mm CCW thread.
The heart of the replica is a reinforced gearbox V3 LiPo Ready, construction is fully modifiable and compatible with standard parts, so the replica can be tuned at will. Instead of the classic contact block, the replica uses a microstick - this release device improves the response of the mechanism to trigger presses, eliminates the possibility of contact burnout and increases firing rate.
The replica has been fully adapted for use with LiPo and LiFe type batteries. With a base initial discharge velocity of ~380 FPS guaranteed by the factory-installed mainspring, the replica is perfectly suited for medium range operations.
The replica uses the quick spring change system - Enter & Convert™. To access the Gearbox, simply knock out the pin located at the flask latch, then pull out the flask locking piece. You then gain access to the mainspring guide, which can be quickly and easily pulled out through the rear of the gearbox. This allows quick and efficient adjustment of the replica's power to the conditions expected on the field of play without the need for access to a workshop or a range of specialised tools. The entire spring change takes 45 seconds and requires only one screwdriver.
The replica, as in the original, is designed to be operated by both right and left-handed people thanks to the double-sided fire selector.
The replica features an interesting solution in the form ofthe EBB (Electric Blow Back)system, this system moves the slide, increasing realism by bringing it closer to its flammable counterpart. This system can be easily deactivated by unscrewing the special guide that connects the piston to the dummy slide.
A Hi-Cap magazine with a capacity of 350 rounds is added to the kit.
Each replica undergoes, while still at the factory, a zero inspection confirmed by a special certificate with a hologram and an individual serial number assigned to each replica.
The kit does not include a battery or charger.
The kit includes:
- replica
- magazine
- instruction manual
- certificate
Charakteristikos